01—Overview
INTER-CANOPY LIGHTING
Bring Light Deeper Into the Crop
In dense high-wire crops, light availability decreases as radiation travels deeper into the canopy. GLPL is designed to position supplemental LED light within the crop itself, bringing photons closer to middle and lower leaves that receive less light from overhead sources.
Its slim linear architecture and two-sided light distribution make GLPL suitable for integration between crop rows as part of a combined top-lighting and inter-canopy lighting strategy.
02 — Key Benefits
Product Architecture
DESIGNED AROUND THE CANOPY
01
Double-Sided Light Output
Delivers supplemental light from both sides of the fixture to improve photon availability within the crop canopy.
03
In-Canopy Light Placement
Positions supplemental light within the crop canopy, targeting areas where light from overhead fixtures is naturally reduced.
05
High Photon Efficiency
Delivers up to 450 μmol/s PPF with efficacy up to 3.3 μmol/J at 50% output, supporting energy-efficient supplemental lighting.
07
Passive Thermal Management
Passive thermal design provides heat management without active cooling components, reducing mechanical complexity.
4
5
1
2
02
06
IP65 Protected Construction
6
Wide-Angle Light Distribution
Broad optical distribution is designed to spread light laterally through the surrounding canopy for effective inter-lighting coverage.
04
2.5 m Slim Linear Design
The long, narrow fixture integrates along high-wire crop rows while minimizing physical interference with the crop.
IP65-rated enclosure provides protection against dust and water ingress for demanding commercial growing environments.
7
3
03 — Performance configurations
Performance Options
Select the GLPL configuration according to project layout, photon-output and efficiency requirements.
Length (Ft) | Power | Input | Channels | PPE @100% | PPF (µmol/s) | Control | Beam | Plus Type |
|---|---|---|---|---|---|---|---|---|
8 | 150W | 200-400 V | 2 | 3.0 | 450 | 0 -10V | 260° | EU Plug/ Bare Wire |
04 — Spectral options
Project-Specific Spectrum Selection
Final spectral configuration should be selected according to crop, project and cultivation requirements.
oF660
oF367+
Spectrum selection can be matched to crop requirements, cultivation strategy and project-specific lighting objectives.
oF670
oF360
oF367
05 — Light Distribution
GLPL uses a wide, two-sided light distribution designed for inter-canopy placement, directing supplemental light toward foliage on both sides of the fixture.
Actual light distribution within the canopy depends on fixture position, row geometry, crop density and installation layout.
06 — Mechanical design
Slim Linear Architecture for Inter-Canopy Integration
Fixture Length
2500 mm
Fixture Width
70 mm
Fixture Height
110 mm
Fixture Weight
4 kg
Driver Width
45 mm
Driver Height
101 mm
07 — Installation & Accessories
Designed for Practical Project Integration
Fixture Integration
Mounting and installation components
Power & Connectivity
Project-specific power and connection options
Dimming and control integration options
Control Accessories
Optional Integration
Additional connectivity and system-integration options can be configured according to project requirements and greenhouse infrastructure.
01
Extended Control Connectivity
02
Project-Specific Interface Options
GLPL Inter Grow Light
Description
The GLPL Inter Light is designed to provide supplemental lighting from inter-canopy level in greenhouse for any crop, increasing the yield by at least 16%.
Mechanically, the GLPL comes with 2m and 2.2m lengths, inter-connectable to each other and run a full row in the greenhouse.
Photometrically, the light comes standard with 90% red, 5% green, 5% blue spectrum and is customizable to any preferred spectrum. Further, the light comes with an omni-directional light distribution which maximize the light use efficiency and avoid the leaf burn.
Electrically, the light is available in 400V and 208-240V input, and 100W to 250W power.